HDMI Ultra HD
This TV can display Ultra HD signals. Some devices -
connected with HDMI - do not recognise a TV with
Ultra HD and might not work correctly or show
distorted picture or sound.
To avoid the malfunctioning of such a device, you can
adjust
HDMI Ultra HD
setting when TV is in the HDMI
source. Recommended setting for legacy device is
Standard
.
Set the signal quality for each HDMI connectors
Settings > General settings > HDMI Ultra
HD > HDMI (port) > Standard, Optimal, or Optimal
(Auto Game).
To change the settings, switch to the HDMI source
first. Select
Optimal
to enable the highest quality
HDMI signal for 4K Ultra HD and HDR content (4K120
4:4:4, 4K120 10 or 12-bit HDR).
• The setting
Optimal
allows maximum up to Ultra HD
(100 Hz or 120Hz) RGB 4:4:4 or YCbCr
4:4:4/4:2:2/4:2:0 signals.
• The setting
Standard
allows maximum up to Ultra
HD (50 Hz or 60Hz) YCbCr 4:2:0 signals.
Maximum supported video timing format for HDMI
Ultra HD options:
• Resolution: 3840 x 2160
• Frame rate (Hz): 50Hz, 59.94Hz, 60Hz, 100Hz#,
120Hz#
• Video data sub-sampling (bit-depth)
- 8 bit: YCbCr 4:2:0, YCbCr 4:2:2*, YCbCr 4:4:4*, RGB
4:4:4*
- 10 bit: YCbCr 4:2:0*, YCbCr 4:2:2*
- 12 bit: YCbCr 4:2:0*, YCbCr 4:2:2*
* Supported only when
HDMI Ultra HD
is set to
Optimal
.
# 3840 x 2160p 100Hz is only supported when
HDMI
Ultra HD
is set to
Optimal
in HDMI1 and 2. 3840 x
2160p 120Hz is only supported when
HDMI Ultra HD
is set to
Optimal
or
Optimal (Auto Game)
in HDMI1
and 2.
Select
Standard
if the picture or sound are distorted.
• Set
Optimal (Auto Game)
to enable TV to support
the HDMI Variable Refresh Rate/Freesync Premium*
video (on some models only and the
Picture style
setting is not
Monitor
). This option also enables TV to
automatically set Picture/Sound style to Game
whenever it is informed by the HDMI device
connected to TV.
* With HDMI Variable Refresh Rate/Freesync
Premium supported, the TV changes its refresh rate in
real time according to the frame rate signal to
synchronize with every picture. It is applied to reduce
the lag, judder and frame tearing for better gaming
experience.
Note:
To watch HDR10+ or Dolby Vision content from HDMI
source, you may need to power off your player and
power on again when the player connected to TV
playing such content for the first time. HDR10+
content is supported only when
HDMI Ultra HD
is set
to
Optimal
. Dolby Vision content is supported only
when
HDMI Ultra HD
is set to
Optimal
or
Optimal
(Auto Game)
.
Auto Film Mode
Enter the settings for the Auto film mode
Settings > General settings > Auto film Mode.
Set the method of detection
Settings > General settings > Auto Filmm Mode >
Film detection.
Select
Off
,
From content
or
From AI detection
to set
how to detect the movie content and then set the
Picture style
automatically.
Set preferred Picture style
Settings > General settings > Auto Filmm Mode >
Preferred Picture style.
Select
Filmmaker Mode
or
Home Cinema
for the
Picture style
that automatically set when movie
contents is detected.
Advanced
HbbTV Settings - Hybrid Broadcast Broadband TV
Switch on HbbTV
Settings > General
settings > Advanced > HbbTV settings > HbbTV
> On.
Switch off HbbTV History Tracking
Settings > General
settings > Advanced > HbbTV settings > HbbTV
tracking > Off.
Remove HbbTV Cookies
Settings > General
settings > Advanced > HbbTV settings > HbbTV
cookies > On.
54