if you do not use the TV for a long period of time.
For more information, in
Help
, press the colour
key
Keywords
and look up
Switching On
for
more information on switching the TV on or off.
2.5
Antenna Cable
Insert the antenna plug firmly into
the
Antenna
socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
input signals.
2.6
Satellite Dish
Expert Help
Consider asking for expert help when you are setting
up a satellite dish system. An existing but unknown
setup or local conditions of the satellite reception
may complicate the setup of your satellite system.
Improper installation may damage the TV electrically.
Warning
When you have a Universal LNB on your satellite dish,
do not use coaxial
cable splitters
unless you are using
a Unicable setup.
One Tuner
To watch a satellite channel and to record another
channel at the same time, you must connect 2
identical cables from your satellite dish to the TV. If
you only have 1 cable available, the channel you are
recording is the only channel you can watch.
Connect the cable from the satellite dish directly to
the
SAT 1
connection. Use a coaxial cable fit for
connecting a satellite antenna dish. Make sure your
satellite dish is perfectly aligned before you start the
installation.
During the satellite installation, select
One Tuner
.
Two Tuners
To watch a satellite channel and to record another
channel at the same time, you must connect 2
identical cables from your satellite dish to the TV.
Connect the first cable from the satellite dish directly
to the
SAT 1
connection and connect the second
cable to
SAT 2
. Use a coaxial cable fit for connecting a
satellite antenna dish. Make sure your satellite dish is
perfectly aligned before you start the installation.
During the satellite installation, select
Two Tuners
.
6
Summary of Contents for 55OLED903
Page 46: ...Sources menu 46 ...