background image

Audio Out - Optical

Audio Out - Optical is a high quality sound
connection. This optical connection can carry 5.1
audio channels. If your device, typically a Home
Theater System (HTS), has no HDMI ARC connection,
you can use this connection with the Audio In -
Optical connection on the HTS. The Audio Out -
Optical connection sends the sound from the TV to
the HTS.

You can set the type of the audio out signal to fit the
audio capabilities of your Home Theater System.
For more information, press 

 Keywords

 and look

up 

Audio Out settings

.

If the sound does not match the video on screen, you
can adjust the audio to video synchronization.
For more information, press 

 Keywords

 and look

up 

Audio to video sync

.

4.2

EasyLink HDMI CEC

EasyLink

With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
(Consumer Electronics Control) to communicate with
the connected devices. Devices must support HDMI
CEC and must be connected with an HDMI
connection.

EasyLink setup

 

 

The TV comes with EasyLink turned on. Make sure
that all HDMI CEC settings are properly set up on the
connected EasyLink devices. EasyLink might not work
with devices from other brands.

HDMI CEC on other brands

 

 

The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos

Link, Bravia Theatre Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink.

Example HDMI CEC branding names are property of
their respective owners.

Operate devices

To operate a device connected to HDMI and set up
with EasyLink, select the device - or its activity - in
the list of TV connections. Press 

 SOURCES

, select

a device connected to an HDMI connection and press

OK

.

Once the device is selected, the TV remote control
can control the device. However 

 and 

 

OPTIONS

keys and some other TV keys are not forwarded to
the device.
If the key you need is not on the TV remote control,
you can select the key in the Options menu.
Press 

 

OPTIONS

 and select 

Controls

 in the menu

bar. On the screen, select the device key you need
and press 

OK

.

Some very specific device keys might not be available
in the Controls menu.

Note: Only devices that support 

EasyLink remote

control

 function will respond to the TV remote

control.

EasyLink settings

The TV comes with all EasyLink settings turned on.
You can turn off any EasyLink setting independently.

EasyLink

 

 

To turn off EasyLink completely . . .

1 - 

Press 

 and select 

Setup

 and press 

OK

.

2 - 

Select 

TV settings

 > 

General settings

 > 

EasyLink

.

3 - 

Select 

Off

 and press 

OK

.

4 - 

Press 

, repeatedly if necessary, to close the

menu.

EasyLink Remote Control

 

 

If you want devices to communicate but you don't
want to operate them with the TV remote control, you
can turn off EasyLink remote control separately.
In the EasyLink settings menu, select 

EasyLink

Remote Control

 and select 

Off

.

Pixel Plus link

 

 

12

Summary of Contents for 6100 series









































































Reviews: