1 -
With the TV connected to your home network, it
will show the available Hue Bridges. If the TV did not
find your Hue Bridge yet, you can select
Scan
again
and press
OK
.
If the TV found the only Hue Bridge you have, select
the Hue Bridge name and press
OK
.
If you have more than one Hue Bridge available,
select the Hue Bridge you want to use and press
OK
.
2 -
Select
Start
and press
OK
.
3 -
Now go to the
Philips Hue Bridge
and press the
link button in the middle of the device. This will link
the Hue Bridge with the TV. Do this within 30
seconds. The TV will confirm if a Hue Bridge is now
linked to the TV.
4 -
Select
OK
and press
OK
.
With the Philips Hue bridge linked to the TV, go to
page
Hue bulbs
.
Step 3 - Hue Bulbs
In the next step, you will select the
Philips Hue
bulbs
that have to follow the Ambilight.
You can select a maximum of 9 Philips Hue bulbs for
Amhue.
To select the bulbs for Amhue…
1 -
In the list, mark the bulbs that have to follow the
Ambilight. To mark a bulb, select the bulb name and
press
OK
. When you mark a bulb, the bulb will blink
once.
2 -
When you’re done, select
OK
and press
OK
.
Step 4 - Configure Bulb
In the following step, you will configure each
Philips
Hue bulb
.
To configure each Hue bulb…
1 -
Select a bulb to configure and press
OK
. The
bulb you selected is flashing.
2 -
Select
Start
and press
OK
.
3 -
First indicate where you placed the bulb relative
to the TV. A correct setting of the
Angle
will send the
correct Ambilight colour to the bulb. Select the slider
bar to adjust the position.
4 -
Secondly, indicate the
Distance
between the
bulb and the TV. The further away from the TV, the
weaker the Ambilight colour. Select the slider bar to
adjust the distance.
5 -
Finally, set the
Brightness
of the bulb. Select
the slider bar to adjust the brightness.
6 -
To stop configuring this bulb, select
OK
and
press
OK
.
7 -
In the
Configure Amhue
menu, you can
do the same for each bulb.
8 -
When all Amhue bulbs are configured,
select
Finish
and press
OK
.
Amhue is ready for use.
Amhue Settings
(Home) > Settings > All
settings >
Ambilight
>
Amb hue
>
Switch
off
Switch off Amhue
(Home) > Settings > All
settings >
Ambilight
>
Amb hue
>
Immersion
Press the arrows
(up) or
(down) to adjust
how accurate the Hue bulbs follow the Ambilight.
(Home) > Settings > All
settings >
Ambilight
>
Amb hue
>
Lounge
light+hue
If you installed Amhue, you can let the hue
bulbs follow Lounge light from Ambilight. The Philips
hue lamps will expand the Lounge light effect across
the room.
(Home) > Settings > All
settings >
Ambilight
>
Amb hue
>
View
configuration
View current setup of the Amhue, network,
Bridge and bulbs.
(Home) > Settings > All
settings >
Ambilight
>
Amb hue
>
Reset
configuration
Reset current setup of the Amhue.
16.3
Advanced Ambilight Settings
Brightness
(Home) > Settings > All
settings >
Ambilight
>
Advanced
>
Brightness
Press the arrows
(up) or
(down) to set the
level of Ambilight brightness.
Saturation
(Home)
>
Settings
>
All
settings
>
Ambilight
>
Advanced
>
Saturation
Press the arrows
(up) or
(down) to set the
52