N.W.:8KGS
2
Warning
In order to prevent fire and electric shock accidents, it is forbidden to install
and use electrical accessories not equipped with this product!
Please cut off the power before installation, disassembly, maintenance, or
cleaning to avoid personal injury!
If unusual oscillating movement is observed, immediately stop using the
ceiling fan and contact the manufacturer, its service agent or suitably
qualified persons.
Attention points:
1.
The product must be installed by the manufacturer or professionally qualified person. The user must not install it by
him/herself for safety reason.
2.
The fan ceiling shall not be installed on the switch box or light keel suspended ceiling, and the hanging area must be
able to bear a weight of at least 60 kg.
3.
To avoid personal injury, the blades should be installed at least 2.3m height above the ground, and the outermost
edge of the fan blades should be at least 0.5m away from the wall (when stretched).
4.
The product is dimmable with the supplied dimmer ONLY. Do not connect to an additional dimmer.
5.
Replaceable (LED only) light source by a professional: The LED light source contained in this luminaire shall only be
replaced by the manufacturer or its service agent or a similar qualified person.
6.
All-pole disconnection switch with a contact greater than 3mm must be installed at the power input end of the
product (All-pole disconnection: N-L can be disconnected at the same time. provided by the users)
7.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
8.
It is recommended to check the connecting parts at least once a year, such as cross pin, blade frame, connecting screw
and fan blades, etc., to ensure that the connection is still safe and reliable.
9.
Regular cleaning can keep the surface clean and bright. Soft brush or cloth is suggested to remove dust to avoid
damaging the surface. When removing oil or deposits, wipe with a slightly damp cloth, do not rinse with water.
10.
The bearing of the fan motor comes with grease. Please do not add lubricating oil additionally.
11.
This product contains a light source of energy efficiency class E
Warning:
Risk of electric shock
y
x
60KGS
X>0.5m
Y>2.3m
EN
