1
Put the plug of the air purifier in the
wall outlet and touch
to turn on
the air purifier.
»
The Wi-Fi indicator
is not
displayed on the screen when
using the air purifier for the first
time.
2
Download and install the '
Air
Matters
' App developed by
FreshIdeas Studio or Philips
'
HealthSuite health
' App from the
App Store
or
Google Play
.
3
Touch
and simultaneously for
3 seconds until you hear a beep.
»
The air purifier goes to pairing
mode.
»
The Wi-Fi indicator
blinks
orange.
4
Make sure that your mobile device
is successfully connected to your
Wi-Fi network.
5
Launch the '
Air Matters
' or Philips
'
HealthSuite health
' App and
follow the onscreen instructions
to connect the air purifier to your
network.
6
After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or the
help section in the '
Air Matters
'
or Philips '
HealthSuite health
'
App for extensive and up-to-date
troubleshooting tips.
Setting up the Wi-Fi
connection for the first
time
Note
•
This function is for AC1214 only.
•
This instruction is only valid when
the air purifier is being set up for the
first time. If the network has changed
or the setup needs to be performed
again, consult section “Setting up the
Wi-Fi connection when the network
has changed” on page 10.
•
You cannot set up two air purifiers at
the same time. If you want to set up
more than one air purifier, you can
only do it successively.
•
Make sure that the distance between
your mobile device and the air purifier
is less than 33 ft/10 m without any
obstructions.
9
EN
E
ngl
ish
Summary of Contents for AC1213
Page 2: ...3s 3s 3s 3s ...
Page 46: ......