Philips AC1715, User Manual

15

EN

2 

Put the power plug in the power socket.

3 

Within 15 seconds after power on, touch and hold   and   button for 

3 seconds to reset the filter lifetime counter.

6 Storage

1 

Turn off the air purifier and unplug from the power socket.

2 

Clean the air purifier, particle sensor and the surface of the filter (see chapter 

“Cleaning and maintenance”).

3 

Let all parts air dry thoroughly before storing.

4 

Wrap the filter in air tight plastic bags.

5 

Store the air purifier, filter in a cool, dry location.

6 

Always thoroughly wash hands after handling the filter.

7 Troubleshooting

This chapter summarizes the most common problems you could encounter with 

the appliance. If you are unable to solve the problem with the information below, 

contact the Consumer Care Center in your country.

Problem

Possible solution

The appliance does 

not work properly.

• 

The filter replacement alert has been on continuously 

but you have not replaced the corresponding filter. As a 

result, the appliance is now locked. In this case, replace the 

filter and long touch   and    to reset the filter lifetime 

counter.

The airflow that 

comes out of 

the air outlet 

is significantly 

weaker than 

before.

• 

The surface of the filter is dirty. Clean the surface of the 

filter (see the chapter “Cleaning and maintenance”).