12
EN
1
Switch off the purifier and unplug it.
2
Place your fingers in the recesses of the
side panels and gently pull the front panel
towards you.
3
Lift the panel off the hooks at the bottom
of the purifier.
4
Remove all the filters from the purifier.
5
Remove all packaging material from the
new filters.
6
Place the new HEPA filter in the purifier
first.
7
Then, place the new activated carbon filter
into the pre-filter.
8
Put the pre-filter back into the purifier.
Attach all hooks properly to the purifier.
9
To reattach the front panel, insert the
bottom hooks into the bottom of the
purifier first. Then, push the panel against
the body of the purifier.
10
Plug the air purifier into the power supply.
Press the
button to switch on the
purifier. Then, press and hold
for 3
seconds to reset the filter. The replacement
light (
滤网
2&3
) will turn off.
3”
Summary of Contents for AC4005
Page 2: ......
