background image

2

EN

1 Important

Safety

Read this user manual carefully before you use 

the appliance, and save it for future reference.

Danger

 

Do not let water or any other 

liquid or flammable detergent 

enter the appliance to avoid 

electric shock and/or a fire 

hazard.

 

Do not clean the appliance 

with water, any other liquid, 

or a (flammable) detergent to 

avoid electric shock and/or a 

fire hazard.

Warning

 

Check if the voltage indicated 

on the bottom or indicated 

at the rear of the appliance 

corresponds to the local 

power voltage before you 

connect the appliance.

 

If the power cord is damaged, 

you must have it replaced 

by Philips, a service center 

authorized by Philips, or 

similarly qualified persons in 

order to avoid a hazard.

 

Do not use the appliance if the 

plug, the power cord, or the 

appliance itself is damaged.

 

This appliance is not intended 

for use by persons (including 

children) with reduced physical 

sensory or mental capabilities, 

or lack of experience and 

knowledge, unless they have 

been given supervision or 

instruction concerning use 

of the appliance by a person 

responsible for their safety.

 

Children should be supervised 

to ensure that they do not play 

with the appliance.

 

Do not block the air inlet and 

outlet, e.g. by placing items on 

the air outlet or in front of the 

air inlet.

Summary of Contents for AC4005



















Reviews: