English
35
EN
Filter alert light
status
Action
A3 displays
on the screen
and the filter
replacement
alert goes on.
Replace the
NanoProtect
filter Pro S3
(
FY4152
)
1
Take out the pre-filter on the
appliance.
2
Take out the expired filter.Discard
used filter.
Note
• Do not touch the pleated filter
surface, or smell the filter as it
has collected pollutants from
the air.
6 Replacing the
air purification
filter
Understanding the
healthy air protect lock
This air purifier is equipped with a
filter replacement indicator to make
sure that the air purification filter is
in optimal condition when the air
purifier is operating. When the filters
need to be replaced, the filter code
displays on the screen and the filter
replacement alert ( ) lights up red.
If the filters are not replaced in time,
the air purifier will stop operating
and automatically lock to protect
the air quality in the room. Replace
the filters as soon as possible
according to the filter code.
Replacing the filter
Note
• The air purification filter is not
washable or reusable.
• Always turn off the air purifier
and unplug from the electrical
outlet before replacing the filters.
• Do not clean the filters with a
vacuum.
• If the pre-filter is damaged,
worn or broken, do not use.
Visit www.philips.com/support
or contact the Consumer Care
Center in your country.
Summary of Contents for AC4072/18
Page 2: ......
Page 44: ... 2018 Koninklijke Philips N V 保留所有权利 4241 211 04671 ...