16
ENGLISH
If the appliance is locked:
1
Check which filter needs to be replaced (see section ‘Filter
replacement lights’).
2
Switch off the appliance and unplug it.
3
Replace the appropriate filter (see section ‘Replacing the
filters’).
Replacing the filters
Tip: Place the appliance against a wall for more stability
when you remove or insert filters.
1
Switch off the appliance and unplug it.
2
Place your fingers in the recesses of the side panels and
gently pull the top part of the front panel towards you. Then
lift the hooks at the bottom of the panel out of the bottom
of the appliance.
3
To remove filter 1 (pre-filter), grab the two projections and
pull the filter towards you.
4
To remove filter 2 (high-efficiency formaldehyde removal
HEPA filter), grab its tag and pull it towards you.
5
Discard the filter that needs to be replaced and unpack the
new filter.
Note: Do not touch the pleated filter surface, or smell the
filter as it has collected pollutants from the air.
Note: Wash your hands after disposing of the used filters.
6
Put filter 2 (high-efficiency formaldehyde removal HEPA
filter) back into the appliance.
Note: Make sure that the side with the tag is pointing
towards you.
Summary of Contents for AC4076
