8
EN
3 Getting started
Install filters
The appliance comes with all filters
fitted inside, but you have to remove
the packaging of the filters before you
can use the appliance. Remove all filters,
unpack them, and place them back into the
appliance as described below.
Note
•
Insert the filters in the correct order.
1
Place your fingers in the recesses of
the side panels and gently pull the top
part of the front panel towards you.
2
Lift the hooks at the bottom of
the panel out of the bottom of the
appliance.
3
To remove the pre-filter, push both
locking clips down, and then pull the
filter towards you.
4
Remove the filter by pulling on the
numbered label.
5
Remove all packaging material from
the filters.
6
Put the HEPA filter, activated carbon
filter and multi-care filter back into the
purifier.
Summary of Contents for AC4373
Page 2: ......
Page 28: ... 2014 Koninklijke Philips N V ...