6
EN
3 Getting started
Installing the filter
Remove all packaging of the filters
before using the appliance. Unpack
them and place them into the appliance
described as follows:
Note
•
Make sure the air purifier is unplugged
from the electrical outlet before
installing the filters.
•
Make sure the side of the filter with the
tag is pointing towards you.
1
Pull the top part of the side panel
to remove it from the air purifier
(fig.
c
).
2
Press the two clips down (1) and
pull the pre-filter towards you (2)
(fig.
d
).
3
Remove all filters (fig.
e
).
4
Remove all packaging materials
from the filter (fig.
f
).
5
Place the filter (
FY5186
) into the
air purifier. The model numbers are
shown on each filter (fig.
g
).
6
Attach the pre-filter back into the
air purifier (fig.
h
).
Note
•
Make sure the side with the two clips
is pointing towards you, and that all
hooks of the pre-filter are properly
attached to the purifier.
7
Reattach the front panel by pressing
the top part of the panel onto the
top of the air purifier (1). Then,
gently push the panel against the
body of the air purifier (2) (fig.
i
).
8
Repeat the above steps and
assemble the filter for the other side
of the air purifier.
9
Wash your hands thoroughly after
installing filters.
Wi-Fi connection
Setting up the Wi-Fi connection
for the first time
1
Download and install the '
Air
Matters
' app the
App Store
or
Google Play
.
2
Put the plug of the air purifier in the
power socket and touch to turn
on the air purifier.
»
The Wi-Fi indicator
blinks
orange for the first time.
3
Make sure that your mobile device
is successfully connected to your
Wi-Fi network.
4
Launch the '
Air Matters
' app and
click on the ‘+’ on the top right of
the screen. Follow the onscreen
instructions to connect the air
purifier to your network.
5
After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or the
help section in the '
Air Matters
'
