6
EN
Note
• Make sure that the side with the
two clips is pointing towards you,
and that all hooks of the pre-filter
are properly attached to the purifier.
6
To reattach the side panel, mount
the panel onto the bottom of the
appliance first (1). Then, gently push
the panel against the body of the
appliance (2) (fig.
h
).
7
Repeat the above steps and
assemble the air purification filters
for the other side of the appliance.
3 Getting started
Installing filters
Remove all packaging of the filters
before using the appliance. Unpack
them and place them into the appliance
described as follows:
Note
• There is one set of filters on each
side of the appliance. Each side is
equipped with one pre-filter and
two air purification filters.
• Make sure that you place the air
purification filters in the appliance
first and then the pre-filter.
• Make sure that the side with the tag
is pointing towards you.
1
Remove all packaging materials of
the air purification filters (fig.
c
).
2
Pull the top part of the side panel to
remove it from the appliance
(fig.
d
).
3
Press the two clips down and pull
the pre-filter towards you (fig.
e
).
4
Put the unpacked air purification
filters into the appliance (fig.
f
).
Note
• Put the NanoProtect filter in the
appliance first, and then the Active
Carbon filter.
5
Put the pre-filter back into the
appliance (fig.
g
).
Summary of Contents for AC6608
Page 2: ...3S 3S 3S 3S 3秒 3S ...
