Note: If there is not a secure connection between the hose cap and the connector on the
water dispenser, the water pump will operate but the water dispenser will not dispense water.
Make sure the hose is connected to the water dispenser correctly.
(
3
)
Dispense water
· Plug the water dispenser into a grounded power outlet. The unit will pump the water from
the water bottle into the cooling and heating tanks.
· Press the hot water faucet until water flows out.
· Turn on the power switch on the back of the unit. The cooling or heating feature will start
running. The indicator light will be on when heating or cooling function is working. Do not
touch both switches during the time.
· Enjoy the hot or cold water you need.
· If you are not going to use hot water, turn the black heating switch to ‘O’; if you are not going
to use cold water, turn the green cooling switch to “OFF” to conserve energy.
Note:
please wait until the water pump stops running before using the unit. If the water tank is
not full, no water will dispense from the water faucet.
Filter
(1) Function of the filter
The filter is made of carbon block, which can remove particles such as micro-plastics, as well
as improving the taste and texture of water.
5
