background image

3

EN

Refer all servicing to qualified service 

personnel. Servicing is required when 

the apparatus has been damaged in any 

way, such as power-supply cord or plug 

is damaged, liquid has been spilled or 

objects have fallen into the apparatus, the 

apparatus has been exposed to rain or 

moisture, does not operate normally, or 

has been dropped.

Battery usage CAUTION – To prevent 

battery leakage which may result in bodily 

injury, property damage, or damage to 

the unit: 

• 

Install all batteries correctly, + and - as 

marked on the unit. 

• 

Remove batteries when the unit is not 

used for a long time.

• 

Perchlorate Material-special handling 

may apply. See www.dtsc.ca.gov/

hazardouswaste/perchlorate.

Apparatus shall not be exposed to 

dripping or splashing, keep it away from 

direct sunlight,naked flames or heat.

Warning

 

Never remove the casing of this apparatus. 

 

Never lubricate any part of this apparatus.

 

Never place this apparatus on other electrical 

equipment.

 

Keep this apparatus away from direct sunlight, naked 

flames or heat. 

 

Ensure that you always have easy access to the power 

cord, plug or adaptor to disconnect this apparatus from 

the power.

Risk of overheating! Never install this apparatus 

in a confined space. Always leave a space of 

at least four inches around this apparatus for 

ventilation. Ensure curtains or other objects 

never cover the ventilation slots on this 

apparatus.

Information about the use of batteries:

Caution

 

Risk of leakage: Only use the specified type of batteries. 

Do not mix new and used batteries. Do not mix 

different brands of batteries. Observe correct polarity. 

Remove batteries from products that are not in use for 

a longer period of time. Store batteries in a dry place.

 

Risk of injury: Wear gloves when handling leaking 

batteries. Keep batteries out of reach of children and 

pets.

 

Risk of explosion: Do not short circuit batteries. Do 

not expose batteries to excessive heat. Do not throw 

batteries into the fire. Do not damage or disassemble 

batteries. Do not recharge non-rechargeable batteries.

Notice

Notice of compliance

Modifications

The user is cautioned that changes or 

modifications not expressly approved by the 

party responsible for compliance could void the 

user’s authority to operate the equipment.

 

FCC & RSS compliance statement

This device complies with Part 15 of the FCC 

Rules and Industry Canada licence-exempt 

RSS standard(s). Operation is subject to the 

following two conditions:

This device may not cause harmful 

interference, and

This device must accept any interference 

received, including interference that may 

cause undesired operation.

 

FCC Radiation Exposure Statement

This equipment complies with FCC’s and IC’s 

RF radiation exposure limits set forth for an 

uncontrolled environment. The antenna(s) 

used for this transmitter must be installed and 

operated to provide a separation distance of 

at least 20 cm from all persons and must not 

be collocated or operating in conjunction with 

Where the MAINS plug or an appliance coupler 

is used as the disconnect device, the disconnect

 device shall remain

 

readily operable.

q

Summary of Contents for AEA3000/07
















Reviews: