Philips AEA3000/07, User Manual

6

EN

3  Get started

Always follow the instructions in this chapter in 

sequence.

Connect the wireless 

receiver to an existing audio 

system

1 

Connect a 3.5mm audio cable to:

• 

the 

LINE-OUT

 socket on the wireless 

receiver.

• 

the 3.5mm audio input socket on your 

existing audio system.

2 

Power on the existing audio system and 

select the 3.5mm audio input source (see 

the user manual of the audio system for 

detailed operation). 

Install/replace microphone 

batteries

Caution

•

Risk of explosion! Keep batteries away from heat, 

sunshine, or fire. Never discard batteries in fire.

•

Danger of explosion if batteries are incorrectly 

replaced. Replace only with the same or equivalent 

type.

•

Batteries contain chemical substances, so they should 

be disposed of properly.

1 

Open the battery compartment and take 

out the battery cartridge.

MP3 LINK

LINE-OUT

2 

Insert 3 x AAA batteries (supplied) into 

the cartridge with correct polarity (+/-) as 

indicated.

3 

Push back the battery cartridge, then close 

the battery compartment.

Note

•

If you are not going to use the microphone for a long 

time, remove the batteries.

•

New batteries installed in the microphone support up 

to 30 hours of continuous use.

•

When the power indicator flashes red, it indicates that 

the power level is low and you need to replace the 

batteries.