background image

3

English

EN

 

Your product is designed and manufactured 

with high quality materials and components, 

which can be recycled and reused. 

 

When this crossed-out wheeled bin symbol is 

attached to a product it means that the product 

is covered by the European Directive 2002/96/

EC.
Please inform yourself about the local separate 

collection system for electrical and electronic 

products.
Please act according to your local rules and 

do not dispose of your old products with your 

normal household waste. Correct disposal of 

your old product helps to prevent potential 

negative consequences for the environment and 

human health.

  

Your product contains batteries covered by 

the European Directive 2006/66/EC, which 

cannot be disposed with normal household 

waste.Please inform yourself about the local 

rules on separate collection of batteries 

because correct disposal helps to prevent 

negative consequences for the environmental 

and human health.

Environmental information

All unnecessary packaging has been omitted. 

We have tried to make the packaging easy to 

separate into three materials: cardboard (box), 

polystyrene foam (buffer) and polyethylene 

(bags, protective foam sheet.) 
Your system consists of materials which can 

be recycled and reused if disassembled by 

a specialized company. Please observe the 

local regulations regarding the disposal of 

packaging materials, exhausted batteries and old 

equipment.

 

“Made for iPad” means that an electronic 

accessory has been designed to connect 

specifically to iPad, and has been certified by 

the developer to meet Apple performance 

standards. Apple is not responsible for the 

operation of this device or its compliance with 

safety and regulatory standards. Please note that 

the use of this accessory with iPad may affect 

wireless performance.
iPad is a trademark of Apple Inc., registered in 

the U.S. and other countries. 
The Bluetooth

®

 word mark and logos are 

registered trademarks owned by Bluetooth 

SIG, Inc. and any use of such marks by Philips is 

under license. 

Note

 

The type plate is located on the back of the unit.

 

Summary of Contents for AEA3000













Reviews: