Supplied accessory
– 1 X certified AC 7.5V adapter
(Input: 220-230V ~50Hz 30mA,
Output: 7.5V
250mA)
Controls (see
1
)
1
ALM 1/ ALM 2
– activates/confirms ALARM 1 /ALARM 2
time setting
– switches off the alarm
2
RADIO ON/OFF
– switches the radio on/off
– switches the set on or to standby
– stops the active buzzer or radio alarm for
24 hours
– switches off the sleep timer
3
TIME SET
– activates/confirms clock/date setting
4
AUTO SCAN
– programs preset radio stations
5
DATE
– displays month and day information in
standby mode
– changes display order between month and
day during setting time
6
RADIO•BUZ
– selects alarm mode: radio or buzzer
7
REPEAT ALARM/BRIGHTNESS
CONTROL
– pushes to switch off alarm for a 9-minute
period
– changes the brightness of the display
illumination
8
LCD Display
– shows the clock/ alarm time
or radio and weather forecast information
9
SLEEP/ALARM RESET
– switches off radio for timer mode
– adjusts timer options for radio playback
– stops the active buzzer or radio alarm for
24 hours
0
/-
– selects a preset radion station
!
/-
– tunes to radio stations
– adjusts clock / alarm time
@
VOL
– adjusts sound level
#
Battery compartment
–
opens to insert 4 x
1.5V
AAA
batteries
$
RESET
– press if the set / display does not react to
operation of any button
%
(ºC ºF) Slide Switch
– selects between Centigrade (ºC) or
Fahrenheit (ºF) temperature unit display
^
DC 7.5V
– socket for AC/DC 7.5V adapter
&
Pigtail
– FM antenna to improve FM
reception
Power supply
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries (not supplied)
1
Open the battery door and insert 4 batteries,
typed
AAA
with the correct polarity as indi-
cated by the "
+
" and "
–
" symbols inside the
compartment.
2
Replace the battery door, making sure the
batteries are firmly and correctly in place.The
set is now ready to operate.
Batteries contain chemical substances, so
they should be disposed of properly.
Mains Adapter
.
Note: Remove the batteries before you
use the AC adapter.
1
Connect the mains adapter to the set's DC
7.5V socket and to the power socket.
Helpful hints:
To avoid damage to the set, use only the adapter
supplied!
The type plate is located on the bottom
of the set.
This set complies with the radio
interference requirements of the
European Community.
English
Controls
Power supply
