background image

4  Using the air 

purifier

Understanding the air 
quality light

Air quality light 
color

Air quality level

Blue

Good

Blue-violet

Fair

Red-purple

Poor

Red

Very poor

The air quality light automatically goes 
on when the air purifier is switched on, 
and lights up all colors in sequence. 
After approximately 30 seconds, the 
air quality sensors select the color that 
corresponds to the surrounding air 
quality of airborne particles.

Turning on and off

Note

 

Always place the air purifier on a 
stable, horizontal, and level surface 
with the front of the unit facing away 
from walls or furniture.

 

For optimum purification performance, 
close doors and windows.

 

Keep curtains away from the air inlet or 
air outlet.

Put the plug of the air purifier in the 
wall outlet.

Attach the pre-filter back into the 
air purifier.

Note

 

Make sure the side with the clip is 
pointing towards you, and that all 
hooks of the pre-filter are properly 
attached to the purifier.

Reattach the front panel by 
pressing the top part of the panel 
onto the top of the air purifier (1). 
Then, gently push the panel against 
the body of the air purifier (2).

Wash your hands thoroughly after 
installing filters.

10

EN

Summary of Contents for AP2266

























Reviews: