13
English
English
1. Wash your hands
thoroughly with soap and
water.
2. Push the white valve in
the pump body as far as
possible.
3. Screw the pump body
onto the bottle.
4. Place the cushion in the
pump body and make sure
that the rim covers the
pump body.
4A. Push the inner part of
the cushion into the funnel
against the line (indicated
with an arrow).
5. Place the silicone
diaphragm in the pump
body.
5A. Make sure that the
silicone diaphragm fits
securely around the rim by
pressing it down with your
thumbs.
6. Attach the silicone tube
and cap onto the silicone
diaphragm. Push down the
cap until it is securely in
place.
7. Connect the tube(s) to the
motor unit.
8. Insert the adapter into the
wall socket and insert the
small plug at the other end
into the motor unit.
9. The breast pump is now
ready for use.
Note: You can place
the cover over the cushion
to keep the breast pump
clean when you take it
with you and while you are
preparing for expressing.
SCF393-SCF391_3000.056.1931.1_BOOKLET-lux_A5_BW.indd 13
SCF393-SCF391_3000.056.1931.1_BOOKLET-lux_A5_BW.indd 13
27-01-21 20:43
27-01-21 20:43
