28
English
Single electric breast pump
Double electric breast pump
External dimensions
Motor unit: 145 mm x 95 mm x 45 mm (LxWxH)
Device classification
Applicable classifications:
Degree of protection against electric shock:
- Class II ME equipment
- Type BF applied part
The breast pump and the adapter are specified as medical electrical
system according to IEC 60601-1.
Materials
ABS, silicone (motor unit)
Polypropylene, silicone (other parts)
Service life
500 hours
Mode of operation
Continuous operation
Non-continuous operation
55
min on, 180
min off at 22
°C
(72
°F) (duty cycle 23
%)
20
min on, 90
min off at 40
°C
(104
°F) (duty cycle 18
%)
Ingress protection
IP22 (motor unit), IP20 (adapter)
Electromagnetic compatibility - compliance information
This device has been tested and found to comply with IEC 60601-1-2:2014 Ed 4.0 for electromagnetic
compatibility (EMC) as Class B according to CISPR 11:2009. Tests levels are listed in the accompanying
tables. Only use this Philips Avent single/double electric breast pump Premium Plus in combination
with the adapter supplied.
Emissions
Compliance
Electromagnetic environment –
guidance
RF emissions
CISPR 11
Group 1
The device does not use RF energy for its
intended function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
Harmonic emissions
IEC 61000-3-2
Complies
Class A Category
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Complies
The device is suitable for use in locations in
residential environments and in
establishments directly connected to a low
voltage power supply network which supplies
buildings used for domestic purposes.
Guidance and manufacturer's declaration – electromagnetic immunity
The Philips Avent single/double electric breast pump Premium Plus is intended for use in the
electromagnetic environment listed below. The user of the device should ensure that it is used in such
an environment to prevent improper operation.