13
English
1. Wash your hands
thoroughly with soap and
water.
2. Push the white valve in
the pump body as far as
possible.
3. Screw the pump body
onto the bottle.
4. Place the cushion in the
pump body and make sure
that the rim covers the
pump body.
4A. Push the inner part of
the cushion into the funnel
against the line (indicated
with an arrow).
5. Place the silicone
diaphragm in the pump
body.
5A. Make sure that the silicone
diaphragm fits securely
around the rim by pressing it
down with your thumbs.
6. Attach the silicone tube
and cap onto the silicone
diaphragm. Push down the
cap until it is securely in place.
7. Connect the tube(s) to
the motor unit.
8A. When the breast pump
is charged, you can use it
cordless. Press and hold
the on/off button until the
device switches on.
8B. You can also use the
breast pump connected to
the wall socket. If the battery
is low, insert the adapter into
the wall socket and insert the
small plug at the other end
into the motor unit.
9. The breast pump is now
ready for use.
3 sec.
English
Summary of Contents for AVENT Premium Plus
Page 2: ......
Page 3: ...1 C B A C B A A1 A2 A3 C5 C3 C4 C2 C1 A4 B1 B2 B3 B4 B5 B6 A5 ...
Page 4: ......
