16
English
1. Wash your hands
thoroughly with soap and
water and make sure that
your breast is clean.
2. Place the breast pump kit
onto your breast. Make sure
that you center your nipple.
3. Press and hold the on/
off button until the device
switches on. The indicator
lights go on to indicate that
the device is in stimulation
mode.
4. The breast pump starts in
stimulation mode and slowly
increases its vacuum to the
last used stimulation suction
level (or level 5 when used
for the first time).
5. The display shows the
running time.
6. Use the 'level up' and
'level down' buttons to
change the suction level to
your preference.
7. After 90 seconds the breast
pump will switch smoothly to
expression mode and slowly
increase its vacuum to the
last used expression suction
level (or level 11 when used
for the first time).
8. If your milk starts flowing
earlier or if you want to
switch from expression
to stimulation mode, you
can switch modes with the
mode selection button.
9. Briefly press the on/off
button if you want to pause.
To continue, briefly press
the on/off button again.
10. Press and hold the on/
off button to switch off.
11. Unplug the adapter from
the wall socket and pull the
small plug out of the motor
unit.
Tip: For optimal expression, choose the highest setting that still feels comfortable. This setting may differ across
different sessions.
Tip: You can use the double breast pump as a single breast pump by connecting only the tube of one pump kit to the
motor unit.
3 sec.
3 sec.
Summary of Contents for AVENT Premium Plus
Page 2: ......
Page 3: ...1 C B A C B A A1 A2 A3 C5 C3 C4 C2 C1 A4 B1 B2 B3 B4 B5 B6 A5 ...
Page 4: ......
