5. Remove the frame
from the motor unit.
6. Cut or fold the edges
of the plastic battery
frame. Remove the
battery from the plastic
battery frame.
Note: Dispose of the
rechargeable battery at a
separate local collection
point. Other parts can be
disposed at a specific
place for disposal of
electric equipment.
Warranty and support
If you need information or support, please visit
www.philips.com/support
or read the international
warranty leaflet.
Troubleshooting
This chapter summarizes the most common problems you could encounter with the appliance. If you
are unable to solve the problem with the information below, visit
www.philips.com/support
for a list
of frequently asked questions or contact the Consumer Care Center in your country.
Problem
Solution
I experience pain when I
use the breast pump.
-
Choose a suction level that is comfortable for you.
-
Check if the silicone diaphragm is undamaged (does not have small
cracks, holes etc.).
-
Ensure that your nipple is placed in the center of the cushion.
-
If the pain persists, stop using the breast pump and consult your
healthcare professional.
The breast pump does
not switch on while it is
connected to the wall
socket.
-
Only use the adapter supplied.
-
Make sure that the adapter has been inserted correctly into the wall
socket and that the small plug has been inserted correctly into the
motor unit.
-
Connect the adapter to another wall socket. Then press and hold the
on/off button to check if the breast pump can be switched on.
-
If the problem persists, contact the Consumer Care Center via
www.philips.com/support
.
24
English
