4
English
corresponds to the local power
voltage.
• Wash, rinse, and sterilise the
appropriate pump parts before
each use.
• Do not use antibacterial,
abrasive cleaners, or detergents
when cleaning breast pump
parts.
• Never put the breast pump
motor in water or steriliser,
as you can cause permanent
damage to the pump.
• If the vacuum generated is
uncomfortable or cause pain,
switch off the breast pump,
break the seal between the
breast and the pump funnel
with your finger, and then
remove the pump from your
breast. You can also pull off the
silicone tube from the motor or
the cap to release the vacuum.
• Do not continue pumping for
more than five minutes at a time
if no result is achieved.
• Never use any accessories or
parts from other manufacturers
or that Philips Avent does not
specifically recommend. If
you use such accessories or
parts, your guarantee becomes
invalid.
• Do not use the breast pump if
the silicone diaphragm appears
to be damaged or broken.
Replace the silicone diaphragm.
See chapter “Guarantee and
service” for information on how
to obtain replacement parts.
been given supervision or
instruction concerning use of
the appliance in a safe way and
if they understand the hazards
involved.
• This appliance shall not be used
by children.
• If expressing becomes
painful, stop and consult
your breastfeeding advisor or
healthcare professional.
• Do not use the breast pump
in the presence of flammable
anaesthetic mixtures with air,
with oxygen, or with nitrous
oxide.
• Although the breast pump
is compliant with applicable
EMC directives, it may still
be susceptible to excessive
emissions and/or may interfere
with more sensitive equipment.
• Make sure not put any products
on the pump motor, like pillow,
blanket etc. Please make
sure pump motor work in well
ventilation and heat dissipation
condition.
Caution
• The product should not be left
unattended when plugged into
a power socket.
• Never drop or insert any foreign
object into any opening or the
silicone tube.
• Do not shorten the silicone
tube.
• Before you connect the breast
pump to the power, make sure
that the voltage of the product
