18
EN
After the measurements, the High De
fi
nition
A/V Receiver calculates the ideal system
response for your particular room and speaker
setup. If some inconsistencies or discrepancies
are detected during the setup, the process
maybe interrupted or the problem is shown in
the particular setup window. A notice screen is
correspondingly displayed. After following and
undertaking the displayed instructions, re-start
the Auto Calibration setup again. When the
measurements are
fi
nalised, the High De
fi
nition
A/V Receiver calculates the ideal system
response for your particular room and speaker
setup.
Note
The test tone emitted during measurement is loud. This
•
maybe bothersome for you and may affect as well your
other household members and even your neighbour.
Navigate through the menu
To navigate through the on-screen menu
options, please do the following using the
remote control or corresponding front panel
buttons:
1
Press
B
to select a menu item. Use
vV
buttons to move up or down the Menu
selections. Repeatedly press
B
to advance
or go further into the sub-menu of a
desired menu item.
2
When you are at a menu item and you
want to set or change the parametre value
(setting), press
B
again until “^
ν
” is
displayed on the extreme right of the
menu item. Use
vV
buttons to move up
or down the menu options.
3
Press
OK
to save the settings or changes
done on the current menu or sub-menu.
4
Press
BACK/EXIT
to exit from a particular
menu and return to the previous menu.
Setting up listening modes
Press
SETUP
/
MENU
button of the remote
control or front panel to display the High
De
fi
nition A/V Receiver’s Main menu on your
video monitor/TV. If the on-screen menu does
not appear, check your
MONITOR OUT
or
HDMI OUT
connections.
The Main Menu contains the menu options:
[Listening mode]
•
[Audio synchs]
•
[Tone controls]
•
[Settings menu]
•
Settings menu
Audio synchs
Listening mode
Tone controls
Listening Mode setup
Language setup
Speaker setup
Source setup
Trigger setup
Video setup
1
On the Main Menu, use
vV
buttons to
navigate through the menu and select
[Settings menu]
, then press
B
.
Settings menu
Listening Mode
Dolby Setup
DTS Setup
Listening Mode setup
Language setup
Speaker setup
Source setup
Trigger setup
Video setup
2
On the
[Settings menu]
, use
vV
buttons
to navigate through the menu and select
[Listening Mode setup]
, then press
B
.
