32
EN
Trigger setup
Settings menu
Trigger out
: Main
Delay :
0s
Listening Mode setup
Language setup
Speaker setup
Source setup
Trigger setup
Video setup
The High De
fi
nition A/V Receiver features a
con
fi
g12V DC Trigger Output that can
be used to activate a device or system it is fed
into.
[Trigger out]
Triggers are low voltage signals used to turn on/
off other compliant devices. There are two
choices where +12V DC output can be assigned
and these are – Main and Source Setup.
[Main]
•
– +12V DC is available at the
assigned Trigger Out when the High
De
fi
nition A/V Receiver is at powered state.
[Source setup]
•
– If Trigger Output is linked
to “Source setup”, +12V DC is available at
Trigger Out whenever the particularly
assigned Source is selected.
[Delay]
The availability of +12V DC at Trigger OUT
can be regulated. If it is desired that +12V DC
is available without delay the moment Trigger
OUT is linked to its assigned setting, set Delay
to 0s. Otherwise, one can select through a
delay time of 1s to 15s.
Listening Mode setup
Settings menu
Listening Mode
Dolby Setup
DTS Setup
Listening Mode setup
Language setup
Speaker setup
Source setup
Trigger setup
Video setup
Please refer to
'Setup'
> '
Setting up listening
modes'> 'Listening Mode Setup'
for more
information.
Adjust listening modes
The High De
fi
nition A/V Receiver's listening
modes have several variations and parametres
that you can modify to suit your personal
preferences. Use a combination of
B
and
vV
buttons to con
fi
gure the following settings.
On the Main Menu, use
vV
buttons to
navigate through the menu and select
[Listening mode]
, and then press
B
.
Settings menu
Audio synchs
Listening mode
Tone controls
Mode
: PLIIx Music
Center Width : 3
Dimensions :
0
Panorama :
Off
[Listening Mode]
The following options can be selected from
[Listening Mode]
under
[Mode]
option. (
This
option is for a two-channel input only.
)
[Stereo]
•
[PLIIx Music]
•
[PLIIx Movie]
•