English
EN
35
Ad
ju
st
se
tt
in
gs
[Cross Color suppressor]
•
– Remove cross
colour artifacts that can occur when
high-frequency luminance (brightness)
signals are misinterpreted as chroma
(colour) signals. This can cause unwanted
fl
ickering,
fl
ashing colours or rainbow
patterns. Select
[On]
to turn on this feature;
otherwise, select
[Off]
.
[Film Mode detection]
•
– Turn on this
setting to compensate for authoring errors
that may have occurred during the process
of converting
fi
lm programmes to video.
Language setup
Listening Mode setup
Language setup
Speaker setup
Source setup
Trigger setup
Settings menu
Video setup
English
This menu allows you to set the menu display
language of the High De
fi
nition A/V Receiver.
This menu allows you to set the display
resolution of the High De
fi
nition A/V Receiver
along with the compatible video format setting
and picture setup.
[Video format]
There are 2 options under Video format –
[Display resolution]
and
[Video format]
. To
access these 2 options, press
B
while at the
[Video format]
line menu item.
[Display resolution]
•
– The High De
fi
nition
A/V Receiver has the excellent ability to
upconvert standard video de
fi
nition
contents to high de
fi
nition video signal.
Depending upon your TV/Monitor’s
resolution capabilities, select the applicable
resolution settings –
[Auto]
,
[576i]
,
[576p]
,
[720p]
,
[1080i]
and
[1080p.
When
[Auto]
is selected, the High
De
fi
nition A/V Receiver automatically
selects the appropriate TV resolution. Note
that if the display is connected to
Composite or S-Video Monitor Out, the
video output resolution must be set to
[480i]
or
[576i]
to view content.
[Video format]
•
– Depending upon your
area, select either
[24 Hz] (
for Blu Ray
player),
[50 Hz]
(normally for Europe) or
[60
[Normal]
or
[Custom]
. While at
[Video
modes]
menu item, select
[Normal]
to retain
the default picture setup settings. If you would
like to further improve the picture settings or
adjust the parametres according to your
preference, set
[Video modes]
to
[Custom]
.
The following parametres can be adjusted.
[Brightness]
•
– Adjust overall brightness of
the picture.
