· The product shall not be installed on the water supply
line with the water pressure over 0.4 MPa. if the inflow
water pressure is over 0.4 MPa, the reducing valve
must be installed (it needs to be purchased separately).
· The inflow water temperature of the product shall be
5-38 degree Celsius, if the inflow water temperature
is over 38 degree Celsius, it will damage the filter and
make it lose efficacy. If the inflow water temperature
is below 5 degree Celsius, it might cause freezing,
and water leaking due to product components
breakage.
· For the product not used for a long term, the water
source must be disconnected so as not to damage
the product.
· Please do not place the product in the place under
high temperature and humidity
· The product shall not be installed in the places with
direct sunlight or exposed in the places containing
harmful chemicals, or any place that might suffer
damage such as falling, impact etc.
· The product shall be cleaned with clean water, please
do not clean the product by direct watering, and do
not use steel wool, abrasive cleanser or corrosive
liquid (such as gasoline or acetone) to clean the
product.
· Please do not pour other liquid into the filter during
cleaning, so as not to cause damage to the filter
filtering system.
9