9
EN
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this product. The
model number and serial number are on the
bottom of the product. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install remote control
batteries
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
1
Open the battery compartment.
2
Insert 2 AA batteries with correct polarity
(+/-) as indicated.
3
Close the battery compartment.
3
1
2
Connect TV
1
Connect the black plug of the supplied
video cable to the
AV OUT
socket on this
unit.
2
Connect the yellow plug to the video input
socket on the TV.
3
Connect the red plug to the audio input
socket marked "R"(for right audio channel).
4
Connect the white plug to the audio input
socket marked "L"(for left audio channel).
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the
bottom of the unit.
•
The type plate is located on the bottom of the main
unit.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
1
Switch the voltage selector at the back of
the unit to the local power line voltage.
L
R
VIDEO
