13
Ensure that the laser lens is clean.
•
Ensure that the CD is not encoded with
•
copyright protection technologies.
The CD skips tracks
Ensure that the CD is not damaged or
•
dirty.
Ensure that program/shuffle mode is
•
deactivated.
USB device or SD/MMC card not supported
The USB device or SD/MMC card is
•
incompatible with the apparatus. Try
another one.
6 Troubleshooting
Troubleshooting
Warning
Never remove the casing of this apparatus.
•
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.Philips.
com/support). When you contact Philips, ensure
that the apparatus is nearby and the model
number and serial number are available.
No power
Ensure that the Mains cord is connected
•
securely.
Ensure that there is power at the AC
•
Mains.
Ensure that the batteries are inserted
•
correctly.
No sound
Adjust the volume.
•
Ensure that the track played is of a
•
compatible format.
Display does not function properly. No reaction to
operation of any of the controls.
1
Disconnect the AC power cord.
2
Connect the AC power cord after a few
seconds.
Cannot play disc
Ensure that the disc label is inserted with
•
the printed side facing up.
Wipe the disc with fibre cleaning cloth
•
from the centre to the edge in a straight
line.
This disc may be defective. Play another
•
disc.
Ensure that the CD is a finalised CD/
•
CD-R/CD-RW.
English
EN
