AVIS
AVISO
DIGITAL TUNER
DIGITAL TUNER
DIGITAL TUNER
Tuning to radio stations
1
Press
y
to on, then press
Source selector
to select
TUNER
(or press
TUNER
on the remote
control) .
–
is displayed briefly and then the radio
station frequency, waveband and, if programmed,
a preset number are shown. (See
3
)
2
Press
FM•MW
once or more to select your
waveband. (or press
BAND
on the remote control)
3
Press and hold
SEARCH
∞
or
§
(or
TUNING -, +
on the remote control) until the
frequency in the display starts running.
™
The radio automatically tunes to a station of suf-
ficient reception. Display shows
dur-
ing automatic tuning.
4
Repeat steps 2-3 if necessary until you find the
desired station.
• To tune to a weak station, press
∞
or
§
briefly
and repeatedly until you have found optimal recep-
tion.
To improve radio reception:
• For
FM
, extend, incline and turn the telescopic aeri-
al. Reduce its length if the signal is too strong.
• For
MW
, the set uses a built-in aerial. Direct this
aerial by turning the whole set.
Programming radio stations
You can store up to a total of 30 radio stations in the
memory, manually or automatically (Autostore).
Manual programming
1
Tune to your desired station (see
Tuning to radio
stations
).
2
Press
PROGRAM
to activate programming.
™
Display:
program
flashes.
3
Press
PRESET (ALB/ PRE) -
,
+
once or more to
allocate a number from 1 to 30 for this station.
4
Press
PROGRAM
to confirm.
™
Display shows the preset number, waveband
and the frequency of the preset station.
5
Repeat steps 1-4 to store other stations.
Helpful hints:
You can erase a preset station by
storing another frequency in its place.
Autostore
Autostore automatically starts programming radio sta-
tions from preset 1. Any previous presets e.g. manual-
ly programmed will be erased.
• Press and hold
PROGRAM
until
appears.
™
Available stations are programmed.
™
After all stations are stored, the first autostore
preset station will then automatically play.
To listen to a preset or autostore station
Press the
PRESET (ALB/ PRE) -, +
buttons once or
more until the desired preset station is displayed.
