AVIS
AVISO
AUX (audio cable not included)
.
(See
9
)
This 3.5mm socket allows you to connect other audio
equipment to your system.
1.
Press
y
to on, then the
source selector
to select
AUX
.
=
Display shows:
AUX
and
PHILIPS
scrolls
2.
Use an audio cable to connect the AUX socket to
the LINE OUT/headphone socket on your external
equipment.
3.
To avoid noise distortion, turn down the volume on
your external equipment.
4.
To adjust the sound and volume, use the sound
controls on your external equipment and the
AZ3068.
Cassette recorder
Cassette playback
1.
Press
y
to on, then the
source selector
to
select
TAPE
.
=
Display shows
throughout tape
operation.
2.
Insert a cassette and close the door.
3.
Press
PLAY
1
to start playback.
4.
To pause, press
PAUSE
;
;. Press
PAUSE
;
again
to resume.
5.
Press
SEARCH
5
/
6
to fast wind the tape.
6.
To stop the tape, press
STOP•OPEN
9/
.
Helpful Hints:
- During playback, the keys are automatically
released at the end of a tape and the set is
switched off (unless PAUSE mode
;
has been
activated.)
- During fast forwarding/rewinding, the keys will
not be released at the end of a tape. To switch
off the set, make sure the cassette keys are
also released.
GENERAL INFORMATION ON RECORDING
• Recording is permissible insofar as copyright or.
other rights of third parties are not infringed.
• For recording, use only NORMAL type cassettes
(IEC type
I
) on which the tabs have not yet been
broken. This deck is not suited for recording on
CHROME (IEC
II
) or METAL (IEC
IV
) type cassettes.
• The best recording level is set automatically.
Altering the
VOLUME
or
BASS
controls will not
affect the recording.
• To protect a tape from accidental erasure, break
out the tabs. If you wish to record again, cover the
tabs with a piece of adhesive tape.
CD Synchro Start recording
1
Select CD function.
2
Insert a CD and if desired, programme track
numbers.
3
Open the cassette door.
4
Insert a suitable tape into the cassette deck and
close the door.
5
Press
RECORD
0
to start recording.
™
Playing of the CD/program starts automatically
from the beginning. You don’t need to start the
CD player separately.
• To select and record a particular passage within
a CD track:
– Press
∞
or
§
. Release the control when you
recognize the passage you want.
– To pause CD playback, press
2;
.
™
Recording starts from this exact point in the
track when you press
RECORD
0
.
6
To pause recording, press
PAUSE
;
.
Press
PAUSE
;
again to resume recording.
7
To stop recording, press
STOP/OPEN
9/
.
Recording from the Radio
1
Tune to the desired radio station (see Tuning to
radio stations).
2
Follow steps 3-7, under CD Synchro Start record-
ing.
AUX / CASSETTE RECORDER
CASSETTE RECORDER
