AVIS
AVISO
MAINTENANCE & SAFETY (See
0
)
CD player and disc handling
• If the CD player cannot read CDs correctly, use a
cleaning CD to clean the lens before taking the set
to repair.
• The lens of the CD player should never be touched!
• Sudden changes in the surrounding temperature
can cause condensation on the lens of your CD
player. Playing a CD is then not possible. Do not
attempt to clean the lens but leave the set in a
warm environment until the moisture evaporates.
• Always close the CD door to avoid dust on the lens.
• To clean the CD, wipe in a straight line from the
centre towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.
• Never write on a CD or attach any stickers to it.
Tape deck maintenance
To ensure quality recording and playback of the tape
deck, clean parts
A
,
B
and
C
as shown, once a
month. Use a cotton bud slightly moistened with alco-
hol or a special head cleaning fluid to clean the deck.
1
Open the cassette door.
2
Press
PLAY
1
and clean the roller
C
.
3
Press
PAUSE
;
and clean the heads
A
, and the
capstan
B
.
4
After cleaning, press
STOP/OPEN
9/
.
Safety Information
•
Place the set on a hard, flat and stable surface
so that the system does not tilt.
• Do not expose the set, batteries, CDs to humidity,
rain, sand or excessive heat caused by heating
equipment or direct sunlight.
• The apparatus shall not be exposed to dripping or
splashing.
• Adequate ventilation with a minimum gap of 6
inches between the ventilation holes and surround-
ing surfaces is necessary to prevent heat build-up.
• The ventilation should not be impeded by covering
the ventilation openings with items, such as news-
papers, table-cloths, curtains, etc
..
• No objects filled with liquids, such as vases, shall
be placed on the apparatus.
• No naked flame sources, such as lighted
candles, should be placed on the apparatus.
• The mechanical parts of the set contain
self-lubricating bearings and must not be oiled or
lubricated.
• To clean the set, use a dry cloth. Do not use any
cleaning agents containing alcohol, ammonia, ben-
zene or abrasives as these may harm the housing.
CAUTIONS:
- Visible and invisible laser radiation. If the
cover is open, do not look at the beam.
- High voltage! Do not open.You run the risk of
getting an electric shock. The machine does
not contain any user-serviceable parts.
- Modification of the product could result in haz-
ardous radiation of EMC or other unsafe opera-
tion.
MAINTENANCE & SAFETY
