1 - 8
FEA
TURES
Programming track numbers
You can store up to 30 tracks to play in a program.
A single track may be stored more than once in the
program.
1
While playback is stopped, select a track with
or
§
§
.
2
Press PROG
to store the track.
y
program
lights up; the track number
programmed and
P
with the total number of
stored tracks are displayed.
3
Select and store all desired tracks in this way
.
4
Press
2;
to start playback of your selected tracks.
y
program
is shown and playback starts.
•Y
ou can review the program by pressing PROG
for more than 2 seconds.
y
The display shows all the stored tracks in
sequence.
Notes:
– If
you
press
PROG
and there is no track selected,
SEL
is
displayed.
–
If
you try to store more than 30 tracks,
FULL
is displayed.
Clearing the program
•W
hile playback is stopped, press
9
to clear program.
y
CLR
is displayed once,
program
goes off,
and the program is cleared.
Note:
The program will also be cleared if the power
supply is interrupted, or if the CD-player lid is
opened, or if the set switches off automatically
.
FEA
TURES
RESUME and HOLD
You can interrupt playback and continue (even after an
extended period of time) from the position where
playback stopped (RESUME) and you can lock all buttons
of the set so that no action will be executed (HOLD).
Use the RESUME–HOLD–OFF slider for these functions.
RESUME – continuing from where you have stopped
1
Switch the slider to RESUME during playback to activate RESUME.
y
resume
is shown.
2
Press
9
whenever you want to stop playback.
3
Press
2;
whenever you want to resume playback.
y
resume
is shown and playback continues
from where you have stopped.
•T
o deactivate RESUME, switch the slider to OFF
.
y
resume
goes off.
HOLD – locking all buttons
You can lock the buttons of the set by switching the slider to HOLD. Now
, when a
key is pressed, no action will be executed. This is of use, for example, when
transporting the player in a bag. With HOLD
activated, you can avoid accidental
activation of other functions.
1
Switch the slider to HOLD to activate HOLD.
y
All buttons are locked.
HoLd
is shown when
you press any button. If the set is switched off,
hold
will be shown only when
2;
or
FM
is
pressed.
2
To
deactivate HOLD, switch the slider to OFF
.
Note: If
you
deactivate
HOLD
by switching the slider to
RESUME,
you will be activating the
RESUME
function.
INSTRUCTION FOR USE