Philips Azur Ionic GC4630/02, Manual

6

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that 

Philips offers, register your product at www.philips.com/welcome.

General description (Fig. 1)

A

  Spray nozzle

B

  Cap of filling opening

C

  Steam boost

D

  Spray button

E

  Steam control

F

  Ionic DeepSteam trigger (specific types only)

G

  Amber temperature light

h

  Auto-off light (specific types only)/Ionic DeepSteam light (specific types only)

I

  Temperature dial

J

  Water tank (specific types only: with light and auto-off indication)

K

  Mains cord

l

  Type plate

M

  Soleplate

 - Not shown: Filling cup

 - Not shown: Heat-resistant protective cover (GC4640 only)

 - Not shown: Delicate fabric protector (GC4625 only)

Important

Read this user manual carefully before you use the appliance and save it for future reference.

Danger

 - Never immerse the iron in water.

Warning

 - Check if the voltage indicated on the type plate corresponds to the local mains voltage before 

you connect the appliance.

 - Do not use the appliance if the plug, the mains cord or the appliance itself shows visible damage, 

or if the appliance has been dropped or leaks.

 - If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by 

Philips or similarly qualified persons in order to avoid a hazard.

 - Never leave the appliance unattended when it is connected to the mains.

 - This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given 

supervision or instruction concerning use of the appliance by a person responsible for their 

safety.

 - Children should be supervised to ensure that they do not play with the appliance. 

 - Do not let the mains cord come into contact with the hot soleplate of the iron.

Caution

 - Only connect the appliance to an earthed wall socket.

 - Check the mains cord regularly for possible damage.

 - The soleplate of the iron can become extremely hot and may cause burns if touched.

 - When you have finished ironing, when you clean the appliance, when you fill or empty the 

water tank and also when you leave the iron even for a short while: set the steam control to 

position 0, put the iron on its heel and remove the mains plug from the wall socket.

 - Iron shall be used on/placed on a stable surface.

 - If iron is placed on its own stand, make sure the stand is placed on a stable surface.

EnGlISh