ENGLISH
7
Steam setting
-
MAX
: This setting gives out highest steam output to provide the best ironing results
on thicker garments.
-
ECO
: This steam setting enables you to save energy, reduce steam output and still
have sufficient steam to iron your garments.
-
Dry
: This steam setting enables you to iron without steam or to stop steam when the
iron is not in use.
-
Iron with extra steam
: Press and hold the steam boost trigger to get more steam to
remove stubborn creases.
Steam boost function and vertical steaming
-
Press and release the steam boost trigger for a powerful boost steam. This can be
used to remove targeted stubborn creases or creases from a hanged garment.
Note: The steam boost function should only be used at temperature setting between
●●●
to MAX. Leaking may appear if you use steam boost at too low a temperature.
Hot steam comes out of the iron. Do not remove wrinkles from a garment while some
one is wearing it. To prevent burns, do not direct the steam at people.
Safety auto-off (specific types only)
The safety auto-off function automatically switches off the iron if it has not been used
for 30 seconds resting on its soleplate or 8 minutes resting on its backplate. The auto-off
light will light up.
-
To let the iron heat up again, pick up the iron or move it slightly. The auto-off light
goes out.
Cleaning and maintenance
Cleaning
1
Unplug the iron and let it cool down.
2
Pour any remaining water out of the water tank from the water filling door.
3
Wipe flakes and any other deposit off the soleplate with a damp cloth and a non-
abrasive (liquid) cleaning agent.
To keep the soleplate smooth, avoid hard contact with metal objects. Never use a
scouring pad, vinegar or other chemicals to clean the soleplate.
Calc clean function
IMPORTANT: This iron comes with a Built-in calc container, which collects loose scale
particles during ironing. The calc container is not meant for removal by the user. The
scale particles are flushed out of the iron during calc clean process. Perform calc clean
once every 1 month to maintain good steam performance and prolong the life of your
iron. If water in your area is hard, or you see scales coming out from the soleplate
during ironing, use calc clean more frequently.
1
Make sure the iron is unplugged and the steam slider is set to dry setting (Fig. 11).
