Philips BDP2930, User Manual

17

English

EN

USB

•  Compatibility: Hi-Speed USB (2.0)

•  Class support: USB Mass Storage Class

•  File system: FAT16, FAT32

•  USB port: 5V  , 500mA

•  Support HDD (a portable hard disc drive): 

an external power source may be needed.

Main unit

•  Power supply rating: AC 220-240V~, 

50/60Hz

•  Power consumption: 11 W

•  Power consumption in standby mode:  

< 1 W

•  Dimensions (w x h x d): 310 x 40 x 203 

(mm)

•  Net Weight: 1.1 kg

Accessories supplied

•  Remote control and 2 AAA batteries

•  User manual

Optional accessory

•  A wireless Philips USB adapter(named 

WUB1110, sold separately)

•  Multimedia connections: Wi-Fi 

802.11b/g/n

•  Connectivity: USB

•  Ambient temperature: 5 deg C to 40 

deg C.

•  Dongle dimensions (W x H x D):  

28.4 x 82 x 13.4 mm

Laser Specification

•  Laser Type (Diode): AlGaInN (BD), AlGaInP 

(DVD/CD)

•  Wave length: 405+7nm/-7nm (BD), 

660+4nm/-10nm (DVD), 790+6/-6nm 

(CD)

•  Output power: 1mW (BD), 0.3mW 

(DVD), 0.28mW (CD)

6 Troubleshooting

Warning

•

Risk of electric shock. Never remove the casing of the 

player.

To keep the warranty valid, never try to repair 

the player yourself. 

If you have problems using this player, check the 

following points before you request service. If 

you still have a problem, register your player and 

get support at www.philips.com/support. 

If you contact Philips, you will be asked for the 

model and serial number of this player. The 

model number and serial number are on the 

back of this player. Write the numbers here: 

Model No. _____________________________

Serial No. ______________________________

Main unit

The buttons on this player do not work.

•  Disconnect this player from the power 

supply for a few minutes, and then 

reconnect.

Picture

No picture.

•  Make sure that the TV is switched to the 

correct source input for this player. .

No picture on HDMI connection.

•  Make sure that the HDMI cable is not 

faulty. If it is faulty, replace with a new 

HDMI cable.

•  On the remote control, press   and then 

press “731” (numeric buttons) to recover 

picture display. Or wait for 10 seconds for 

auto recovery.

•  If this player is connected to an 

unauthorized display device with an HDMI 

cable, the audio and video signals may not 

be output.

BDP2930_79_UM_EN_V2.0.indd 17

2012/6/28 11:48:46