1-6-1
B4_INT(P&F)(LED_Netflix model)
HOW TO INITIALIZE THE BLU-RAY DISC PLAYER
To put the program back at the factory-default,
initialize the BD player as the following procedure.
Note:
• By initializing, network is reset to disconnected state
and “Network Service Disclaimer” appears on the
screen.
• Once the unit is initialized, the unit starts in Virgin
Mode the next time it is turned on. The Virgin Mode
allows quick set up of language and network settings.
To exit this mode, select “Cancel” on the screen.
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [
] (skip up), [1], [2], and [3] buttons on the
remote control unit in that order.
Fig. a appears on the screen. All LED lights.
Fig. a
4. Press [
C
] button on the remote control unit.
Fig. b appears on the screen.
Fig. b
5. After initializing, the power will turn off
automatically.
"*" differ depending on the models.
F/W Name
Version
Region
Pickup
ESN
DRM
Version Display
: *******
: *.**.**
: *-*
: **
: ********************************
: OK
Default Setting
: --
Default Setting : STOP
End : STANDBY-ON
VFD/LED Check : OK
"*" differ depending on the models.
F/W Name
Version
Region
Pickup
ESN
DRM
Version Display
: *******
: *.**.**
: *-*
: **
: ********************************
: OK
Default Setting
: SUCCESS
Default Setting : STOP
End : STANDBY-ON
VFD/LED Check : OK
