9
EN
• After successful Bluetooth connection, play
music on the Bluetooth device.
»
Music streams from your Bluetooth
device to the speaker.
To disconnect the Bluetooth-enabled device:
• Disable Bluetooth on your device;
• Press and hold on the speaker for more
than three seconds; or
• Move the device beyond the
communication range.
To clear the pairing information:
• Press and hold on the speaker for more
than ten seconds.
To reconnect the Bluetooth-enabled device:
• For a paired Bluetooth device on which
automatic reconnection is enabled, this
speaker reconnects with it once it is
detected.
• For a paired Bluetooth device that does
not support automatic reconnection,
reconnect it with this speaker manually.
To connect another Bluetooth-enabled device:
• Disable Bluetooth on the current device,
and connect another device when the
indicator flashes blue.
Tip
•
Before you reconnect a Bluetooth-enabled device
(especially an iOS device) to the speaker, you may
need to clear the previous pairing information on your
device.
indicator
Description
Flashing blue
Connecting or waiting for
connection
Solid blue
Connected
Listen to an external device
You can listen to an external audio device
such as an MP3 player through the
AUDIO IN
socket on the speaker.
1
Pull open the protective cover.
2
Connect an audio cable with a 3.5 mm
connector on both ends to
• the
AUDIO IN
socket on the speaker,
and
• the headphone socket on the external
device.
3
Press the
AUDIO IN
button to switch to
the AUDIO IN source.
»
The
AUDIO IN
indicator lights up
white.
4
Play music on the external device (refer to
its user manual).
Play in group mode
Group mode:
If you have more than one
izzylink-compatible multiroom speakers, you can
create a group and stream music to the group
of speakers at the same time.
To use this feature, you need to purchase
more than one izzylink-compatible multiroom
speakers.
