background image

7

EN

3  Get started

Caution

 

Use of controls or adjustments or performance of 

procedures other than herein may result in hazardous 

radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in 

sequence.

If you contact Philips, you will be asked for the 

model and serial number of this apparatus. The 

model number and serial number are on the 

back of the apparatus. Write the numbers here: 

Model No. __________________________

Serial No. ___________________________

Connect speakers

Note

 

For optimal sound, use the supplied speakers only.

 

Connect only speakers with impedance that is the 

same or higher than the supplied speakers. Refer to the 

Specifications section of this manual.

  

SPEAKER OUT

2

1

3

Connect FM antenna

Connect the supplied aerial to this device 

before listening to the radio.

 

Connect power

Caution

 

Risk of product damage! Ensure that the power supply 

voltage corresponds to the voltage printed on the back 

or the underside of the unit.

 

Risk of electric shock! When you unplug the AC power 

cord, always pull the plug from the socket. Never pull 

the cord.

 

Before you connect the AC power cord, ensure that 

you have completed all other connections.

  

SPEAKER OUT

SPEAKER OUT

Summary of Contents for BTB7150

























Reviews: