background image

English

7

General Information

Congratulations on your purchase and welcome

to Philips!

To fully benefit from the suppor t that Philips

offers, register your product at www.philips.com/
welcome.

This product complies with the radio
interference requirements of the European
Community.

Supplied accessories

– 1 X certified AC/DC adaptor Brand name:

PHILIPS,  Model: PAT075A29UV Input: 100-
240V, 50/60Hz, 1.6A Output: 29.0V, 

 2.5A

– 2 speaker boxes
– remote control
– FM antenna

Environmental Information

All unnecessary packaging has been omitted. We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).

Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.

Disposal of  your old product

Your product is designed and manufactured with
high quality materials and
components, which can be
recycled and reused.

When this crossed-out wheeled
bin symbol is attached to a
product it means the product is
covered by the European
Directive 2002/96/EC

Please inform yourself about the local separate
collection system for electrical and electronic
products.

Please act according to your local rules and do
not dispose of your old products with your
normal household waste. The correct disposal of
your old product will help prevent potential
negative consequences for the environment and
human health.

Safety Information

Before operating the system, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your system is identical with the
voltage of your local power supply. If not, please
consult your dealer.

Place the system on a flat, hard and stable
surface.

Where the MAINS plug or an appliance coupler
is used as the disconnet device, the disconnet
device shall remain readily operable.

The apparatus shall not be exposed to
dripping or splashing.

Install the unit near the AC outlet and where the
AC power plug can be easily reached.

Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system.  Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.

The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, cur tains, etc.

Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.

No naked flame sources, such as lighted candles,
should be placed on the apparatus.

No objects filled with liquids, such as vases, shall
be placed on the apparatus.

If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.

The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.

PG 001-028_BTM177_12-Eng

2/29/08, 16:00

7

Summary of Contents for BTM177






























Reviews: