English
23
External Sources
Notes:
– Some functions may be unavailable during
ripping. In this case, you may see a prompt of
“PRESS STOP TO RELEASE” on the display panel.
– You can continue enjoying music during ripping.
However, music playback will be interrupted during
speedy ripping.
– This function can also be combined with the
programme function. In this case, selection of "REC
ALL" in DISC mode will record all programmed
tracks from the starting point to the USB mass
storage device or SD/MMC memory card.
– Never unplug the USB mass storage device or
SD/MMC memory card before pressing
9
to stop
ripping.
– In the DISC mode, when you stop ripping or the
free space is insufficient, the current track being
ripped will not be recorded to your USB mass
storage device or SD/MMC memory card and the
playback will stop at the same time.
To delete a track from your USB mass
storage device or SD/MMC memory card
1
Plug in the USB mass storage device or SD/
MMC memory card.
2
Select the track to be deleted during playback.
3
Press and hold
9
for 3 seconds.
➜
"PRESS OK TO DELETE" scrolls.
4
Press
OK
on the remote control to confirm the
deletion within 5 seconds.
➜
"DELETE" appears.
The making of unauthorized copies of
copy-protected material, including
computer programmes, files, broadcasts and
sound recordings, may be an infringement
of copyrights and constitute a criminal
offence. This equipment should not be used
for such purposes.
2
Prepare the source to record from. You can
select one of the following sources for recording
each time:
DISC
- load a disc. Then, select a track where
ripping will start. (See "CD/MP3-CD/WMA
Operations".)
BT (BLUETOOTH)
- Connect a Bluetooth-
enabled device supporting the A2DP profile to
the system. Select a track where ripping will start
(See “Bluetooth Operation”).
AUX
- connect external equipment.
3
If the selected source for recording is
BT
(BLUETOOTH)
or
AUX
, pess
REC
• to start
ripping directly.
➜
"NO MEDIA" will be displayed briefly if there
is no USB mass storage device or SD/MMC
memory card connected to the system.
➜
"ERROR" will be displayed if the free space in
the USB mass storage device or SD/MMC
memory card is insufficient.
➜
"REC" will start flashing on the display.
●
If the selected source for recording is DISC and
an MP3/WMA disc has been inserted,
–
press
REC
• once to record the current track.
➜
"REC_ONE" will be displayed briefly.
–
press
REC
• twice to record all tracks available.
➜
"REC_ALL" will be displayed briefly.
●
If the selected source for recording is DISC and
a CD has been inserted,
–
press
REC
• once during disc playback to
record the current track at normal speed (1X).
➜
"REC_ONE" will be displayed briefly.
–
press
REC
• once in the stop mode to record
the current track at 2X speed.
➜
"2XREC_ONE" will be displayed briefly.
–
press
REC
• twice during disc playback to
record all tracks available at normal speed (1X)
➜
"REC_ALL" will be displayed briefly.
–
press
REC
• twice in the stop mode to record
all tracks available at 2X speed.
➜
"2XREC_ALL" will be displayed briefly.
4
At any moment, simply press
9
to stop ripping.
pg001-032_BTM630_12-Eng
2007.9.24, 16:21
23
