20
Sticked it onto the dashboard.
•
Or clip it on the sun-shield.
•
Voice dialing
You can dial a number by voice if your mobile
phone supports voice dialing.
1
Press
for 3 seconds.
»
[VOIC DIAL]
is displayed.
2
Speak a name stored in contact list
stored in the phone.
The unit repeats the number and calls
»
out.
»
[NO MATCH]
is displayed if the unit
does not recognize a number.
Make a call
1
Press
SOURCE
repeatedly to select
[BT
MUSIC]
.
2
Press
.
3
Press
or to select from the following
list:
•
[DIAL NUM]
: dial a number directly
•
[DIALLED]
: dialled number
•
[MISSED]
: missed call
•
[RECEIVED]
: received call
•
[ME PBK]
: Phone directory
•
[SIM PBK]
: SIM card directory
4
Press
to confi rm the selection.
To dial a number directly, select
[DIAL NUM]
.
5 Use
bluetooth
devices
With this car audio system, you can listen
to audio fi les from a player or make a call
if bluetooth connection is available on your
phone or player.
Pairing bluetooth devices
You can pair your bluetooth device with the
unit as follows:
1
Turn on bluetooth function on the device.
2
Setup bluetooth fuction on your device.
3
Select “CEM250” in the pairing list.
4
Enter default password “0000”.
“
»
[CONNECT]
” is displayed on the
panel if pairing succeeds.
Tip
If the paired device is moved beyond the
•
operational range, when it is brought back,
please check if the device is still connected
with the system:
. If they are connected,
•
[Disconnect]
(red icon)
is displayed.
. If connection is lost,
•
[Connect]
(green icon) is
displayed. Follow the instruction above to pair
the device with the system again.
Adjust microphone position
For better sound quality in make/receive phone
call through Bluetooth, place the microphone at
a location close to mouth.
1
Make sure the supplied microphone is
connected to the car audio system. (See
“Connect wires” section).
2
Place the microphone at a proper
location. For example,
EN
