background image

Ideal for roadway lighting,
warehouse lighting, security lighting,
and industrial applications

Comfort High Pressure Sodium

For improved color rendering.

RetroLux High Pressure Sodium

Replace Mercury Vapor with energy efficient
HPS; operates on mercury vapor ballast.

Instant Restrike
High Pressure Sodium

Dual arc-tube delivers 40,000 hours rated
average life vs. 24,000 hours rated average
life for standard HPS lamps. Extra arc-tube
provides light instantly after momentary
power interruption.

ALTO

®

High Pressure Sodium

Passes EPA’s TCLP

1

test for non-hazardous waste.

MasterColor

®

HPS-Retro White

Optimized to operate on a high pressure
sodium ballast. Replace yellow light with
crisp, bright white light with just a simple twist!

1) 

The TCLP is the US EPA’s Toxicity Characteristic Leaching Procedure.

Ceramalux

®

High Pressure Sodium Lamps

Energy efficiency and long life

Summary of Contents for Ceramalux P-2220-E

Page 1: ... hours rated average life vs 24 000 hours rated average life for standard HPS lamps Extra arc tube provides light instantly after momentary power interruption ALTO High Pressure Sodium Passes EPA s TCLP1 test for non hazardous waste MasterColor HPS Retro White Optimized to operate on a high pressure sodium ballast Replace yellow light with crisp bright white light with just a simple twist 1 The TC...

Page 2: ... to change without notice ANSI Std Rated Approx Approx Product Ordering Nom Code Pkg LCL MOL Avg Life Initial Mean CCT Number Code Watts Bulb Base Ballast Ref Qty Description In In Hrs 1 Lumens2 Lumens3 CRI K 30617 5 C70S62 C M 70 BD 17 Med S62 12 G 4 6 9 12 3 7 16 5 7 16 15 000 4400 3960 60 2200 30635 7 C100S54 C M 100 BD 17 Med S54 12 G 4 6 9 12 3 7 16 5 7 16 15 000 7800 7020 60 2200 30637 3 C10...

Page 3: ...N types and 4000 volts for other sizes 7 C150S55 and C150S56 lamps are not electrically interchangeable Different ballasts are required for the proper operation of each lamp type ANSI type S55 ballast is for the 55 volt normal lamp and the ANSI type S56 ballast is for the 100 volt nominal lamp 8 This lamp should be shielded from moisture to prevent breakage 9 For use in fixtures which do not redir...

Page 4: ...hilips Electronics North America Corporation Somerset New Jersey 08875 CAUTION TO REDUCE THE RISK OF PERSONAL INJURY PROPERTY DAMAGE BURNS AND FIRE RESULTING FROM AN ARC TUBE RUPTURE THE FOLLOWING LAMP OPERATING INSTRUCTIONS MUST BE FOLLOWED LAMP OPERATING INSTRUCTIONS 1 RELAMP FIXTURES AT OR BEFORE THE END OF RATED LIFE Allowing lamps to operate until they fail is not advised and may increase the...

Reviews: