27
The paired mobile phone connects and
disconnects constantly.
The Bluetooth reception is poor. Move
•
the mobile phone closer to the system or
remove any obstacle between the mobile
phone and the system.
Some mobile phones may connect and
•
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of the system.
For some mobile phones, the Bluetooth
•
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
Preset stations lost.
Battery cable is not correctly connected.
•
Connect the battery cable to the terminal
that is always live.
Fuse is broken
The Fuse type is incorrect. Replace it with
•
a 5A fuse.
Speaker wire or power wire is grounded.
•
Check the connections.
Display show ERR-12
USB/SD/MMC data error. Check the USB
•
device or SD/MMC card.
About Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
The device cannot be used with the
•
system to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
The Bluetooth reception is poor. Move
•
the device closer to the system or
remove any obstacle between the device
and the system.
Cannot connect with the system.
The device does not support the profiles
•
required for the system.
The Bluetooth function of the device is
•
not enabled. Refer to the user manual of
the device for how to enable the function.
The system is not in the pairing mode.
•
The system is already connected with
•
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
English
EN
