30
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the
damaged fuse (15A)
4
Replace the fuse.
Note
If the fuse gets damaged immediately after it
•
has been replaced, there may be an internal
malfunction. In such case, consult your Philips
dealer.
Tip
When the unit is reset, all the settings remain
•
unchanged.
Remove the unit
To repair, replace fuse, or replace the unit,
remove it from the dashboard.
1
Screw off the four (4) screws on the left/
right side of the unit.
2
Pull the unit out from the dashboard.
Replace fuse
If there is no power, the fuse may be damaged
and need to be replaced.
1
Take out the unit from dashboard.
EN
Summary of Contents for CID3687
Page 2: ......
Page 35: ......
Page 36: ... 2010 Koninklijke Philips Electronics N V All rights reserved CID3687_00_UM_V1 0 ...