38
5.13
Docking connector
The CliniScape can be docked on its docking unit without any locking mechanism. This allows a “grab and go”
one hand removal when you have to take the MCA seated in the docking station (please refers to the Docking
station manual).
When the unit is docked, you can use its available port to connect USB keyboard, mouse and other devices and
also have an Ethernet connection.
Table 9 – Connector layout specifications
Pin Signal
Pin Signal
1 GND
10 LAN
TD+
2 GND
11 ENET
SHIELD
3 GND
12 USB
D+
4 GND
13 USB
D-
5
GND
14
DC - VCC
6
Interlock
15
DC - VCC
7
LAN RD-
16
DC - VCC
8
LAN RD+
17
DC - VCC
9
LAN TD-
18
DC - VCC
Note:
the docking connector is “enabled” only when the MCA is fully docked. There are no
voltages present on the connector when the CliniScape is undocked.
As the mating of the MCA and docking station connectors needs to be very accurate, please,
be sure that the MCA is fully seated in its prescribed position, including:
There are several indicators that this has happened:
change of the screen brightness
battery LED indicators that starts indicating that the MCA battery is charging
USB connection “sound”and icon shown in the icon tray (if enabled)
Local Area Network icon shown in the icon tray (if enabled)
17
18
1
2
Summary of Contents for CliniScape CMCA10
Page 1: ...CliniScape MCA 104 series www fimi philips com Cliniscape Mobile Clinical Assistant ...
Page 12: ...12 2 4 Overview 2 4 1 MCA Dimensions in mm 31 5 205 265 29 5 48 5 250 ...
Page 16: ...16 Ventilation grid Battery slot USB door under cover Battery release lever under cover ...
Page 55: ...55 13 Your notes ...