Philips Comfort HR7641, User Manual

ENGLISH

7

Important

◗

Read these instructions for use carefully and
look at the illustrations before using the
appliance.

◗

Keep these instructions for use for future
reference.

◗

Check if the voltage indicated on the
appliance corresponds to the local mains
voltage (110-127V or 220-240V) before you
connect the appliance.

◗

Never use any accessories or parts from
other manufacturers or that have not been
specifically advised by Philips. Your guarantee
will become invalid if such accessories or
parts have been used.

◗

Do not use the appliance if the mains cord,
the plug or other parts are damaged.

◗

If the mains cord of this appliance is damaged,
it must always be replaced by Philips or a
service centre authorised by Philips, in order
to avoid hazardous situations.

◗

Thoroughly clean the parts that will come
into contact with food before you use the
appliance for the first time.

◗

Do not exceed the quantities and preparation
times indicated in the tables and recipes.

◗

Do not exceed the maximum content
indicated on the bowl or the blender jar, i.e.
do not fill beyond the top graduation.

◗

The emulsifying disc, the knife and the
kneading accessory have to be placed on the
tool holder that stands in the bowl.

◗

Unplug the appliance immediately after use.

◗

Never use your fingers or an object (e.g. a
spatula) to push ingredients down the feed-

tube while the appliance is running. Only the
pusher is to be used for this purpose.

◗

Always unplug the appliance before reaching
into the blender jar with your fingers or an
object (e.g. a spatula).

◗

Keep the appliance out of the reach of children.

◗

Never let the appliance run unattended.

◗

Switch the appliance off before detaching any
accessory.

◗

Never switch the appliance off by turning the
lid. Always switch the appliance off by
pressing the PULSE / 0 button.

◗

Never immerse the motor unit in water or
any other fluid, nor rinse it under the tap. Use
only a moist cloth to clean the motor unit.

◗

When you mount the blender jar, the bowl
and/or the screw cap properly onto the
motor unit, you will hear a click.

◗

Remove the cover from the blade before use.

◗

Avoid touching the SHARP blades, especially
when the appliance is plugged in.

◗

If the blades get stuck, unplug the appliance
before removing the ingredients that are
blocking the blades.

◗

Let hot ingredients cool down before
processing them (max. temperature
80

c

C/175

c

F).

◗

If you are processing a liquid that tends to
foam, do not put more than 1 litre into the
blender jar to avoid spillage.

◗

Always check the sieve holder of the juice
extractor before use. If you notice any
damage or cracks, do not use it and contact
your nearest Philips Service Centre.